Sculpey Tools – Bead Maker
Product Information
Product code: AS2035 Categories: Bead Making Tools, JEWELRY SUPPLIES, Miscellaneous, Sculpey Molds-Polyform, TOOLS & SUPPLIES$18.99 H.S.T.
Sculpey® Bead Maker
The Sculpey® Bead Maker allows you to create beautiful perfectly-round polymer clay beads for your designs in minutes.
Choose from 3 different size beads — 13 mm, 16 mm and 18 mm — with 3 precise snap in molds for rolling.
Measuring cups guarantee a perfectly-sized, perfectly-round bead every time!
Easy to use and makes beads in seconds.
3 in stock
Product Categories
Be the first to review “Sculpey Tools – Bead Maker” Cancel reply
You must be logged in to post a review.
Additional information
Weight | 0.13 kg |
---|---|
Dimensions | 11 × 11 × 5.5 cm |
Our offers
Head Pins 144 pcs
Head Pins -Gold/Brass Tone 144 pcs
Use these to attach beads or polymer pieces etc. 45mm/1.75" in length
Measured by weight so count may not always be exact.
Related Products
Glue on Bail (36 pk)
Glue on Bails- 16mm Package of 36
These bails are a lovely, smooth, highly polished choice. The picture shows them on 2.5mm SoftGlass 16mm from top to bottom. Available in both Gold Plate and Silver Plate. Packages of 36
Glue on or embed into polymer clay.
O-Rings for 8mm Buna Cord-50 pack (Choose Thin or Thick)
O-Rings for 8mm Buna Cord-Package of 50.
Choose from the Thin O-Ring or the Thick O-Ring.
These O-Rings fit the 8 mm Buna cord snugly. Use them to finish off the ends of your cord or use them as bead stoppers. Use on thinner buna cord as a decorative element. Use in place of the traditional jump rings. Use as part of your chain maille projects.
Terminator End Caps-Antique Silver (10 Pack) – for 2mm or 4mm cord
Terminator End Cap Antique Silver
This decorative end cap fits either 2 mm or 4 mm cords.
Choose the correct size for your cord (10 Pack)
Exquisite quality. Made in Greece. Glue in place.
Lapel Pin with Clutch (6 sets)
Lapel Pin with Clutch (6 sets) Silver Tone
Yours to embellish however you want. Perfect for attaching to the back of your polymer clay (or other) creation when you want to wear them on clothing.
Use on a lapel, wear it like a brooch or on a sweater to keep it closed at the front when there aren't any buttons.
Easy on and off with the pinch clasp.
Jump Rings – Silver 5mm 144 pcs
Jump Rings - Silver 5 mm 144 pcs
Measured by weight so count may not always be exact.
O-Rings for 12.7mm (1/2″) Buna Cord 50 pack (Choose Thin or Thick)
O-Rings for .500 mm (1/2") Buna Cord-Package of 50.
Choose from the Thin O-Ring or the Thick O-Ring.
These O-Rings fit the 1/2" Buna cord snugly. Use them to finish off the ends of your cord or use them as bead stoppers. Use on thinner buna cord as a decorative element. Use in place of the traditional jump rings. Use as part of your chain maille projects.
Barrel-End Cap to fit 6mm Cord (12 pack)
Barrel End Cap with loop to fit 6 mm Cord (12 pack) Nkl Plate
These end caps are a nice heavy gauge. Glue any 6 mm cord into end cap.
Use with our 6 mm Buna cord.
Use with cyanoacrylate glue, epoxy or resin.
Twist Closure-Stainless Steel Clasp-ID 6mm (5 clasps)
Twist Closure-Stainless Steel Clasp (5 sets) ID 6mm
Beautiful quality, strong magnetic hold. Less expensive alternative to silver plated clasps. $2.60 per clasp.
23.3X6.9mm. Inner dimension is 6 mm
Works with any 8 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Black Buna Cording (choose thickness 2mm-5mm) sold by the meter
Buna Cord comes in black and in a variety of thicknesses to choose from
Our black Buna cord is industrial grade. Great for using with any jewelry project.
Sold by the meter but you decide how long the cut piece is (only the 12.7 thickest size is pre-cut and comes with o-rings.)
See below for more information.
Reviews
There are no reviews yet.