-
- Video
Be the first to review “Sculpey Tools – Bead Maker”
You must be logged in to post a review.
Additional information
| Weight | 0.13 kg |
|---|---|
| Dimensions | 11 × 11 × 5.5 cm |
Related Products
Quick View
Sculpey Tools – Bead Making Kit
Sculpey® Bead Making Kit
This set has everything you need to make the perfect beads! It evens comes with a bead making guide that will show you step by step how to make a variety of beads.
The Bead Making Kit provides all the essential tools needed to start making beautiful beads!
Baking Cushion: Reusable cushion perfect for baking beads to avoid distortion and shiny bottoms.
400/800 grit wet/dry sandpaper: Creates a smooth finish to baked beads. Also can be used to texture unbaked clay.
Blade: Makes clean, straight cuts and edges.
Circle Cutter: Helps make the same size bead every time.
Needle Tool: Used to pierce unbaked beads. Also good for texturing, fine detail and patterns.
Lentil Bead Tool: Used to create lentil shaped beads.
Clay Roller: Essential tool for rolling smooth, even sheets of clay.
Storage Pouch: It holds all the tools for quick and easy storage. Please note, the pouch is the thick plastic re-closable bag it comes it, NOT the purple pouch shown in the video.
Bead Making Guide: Filled with bead making tips and step by step instructions for a variety of different style beads!
Quick View
Tim Holtz® Tools by Tonic Studios – 9.5″ Titanium Shears
Tim Holtz 9.5" Titanium Shears
The 9.5" Tim Holtz Titanium Shear 9.5 Inch scissors are resistant to rust and corrosion, high durability Titanium coated blades, Micro-serrated edge for controlled cutting and excellent cutting on all types of craft materials including sheet rubber and vinyl.
Titanium coating for durability.
Micro Serrated for grip and control. See the smaller 5" snips and 7" snips.
Double Bevelled blades for extra cutting ability. Not for use by children.
Overal product length 9.5" / 24.13cm
Quick View
Jump Rings – Gold 7mm 144 pcs
Jump Rings - Gold tone 7 mm 144 pcs
Measured by weight so count may not always be exact.
Quick View
Lapel Pin with Clutch (6 sets)
Lapel Pin with Clutch (6 sets) Silver Tone
Yours to embellish however you want. Perfect for attaching to the back of your polymer clay (or other) creation when you want to wear them on clothing.
Use on a lapel, wear it like a brooch or on a sweater to keep it closed at the front when there aren't any buttons.
Easy on and off with the pinch clasp.
Quick View
Terminator End Caps-Antique Silver (10 Pack) – for 2mm or 4mm cord
Terminator End Cap Antique Silver
This decorative end cap fits either 2 mm or 4 mm cords.
Choose the correct size for your cord (10 Pack)
Exquisite quality. Made in Greece. Glue in place.
Quick View
Jump Rings – Silver 7mm 144 pcs
Jump Rings - Silver tone 7 mm 144 pcs
Measured by weight so count may not always be exact.
Quick View
Brooch Back- Silver Tone-Pack of 12
Brooch back- Pin Backs
Pin Back 1.25" Silver Tone Package of 12 pc with locking bar.
Attach with glue, resin or cover with polymer clay and bake for a more secure method.
Quick View
Magnetic Closure-Stainless Steel Clasp-ID 6mm (2 clasps)
Magnetic Closure-Stainless Steel Clasp (2 sets) ID 6mm
Beautiful quality, strong magnetic hold. These are over-sized and gorgeous! Less expensive alternative to silver plated clasps.
30.5X10.75 mm Inner dimension is 6 mm
Works with any 6 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Quick View
O-Rings for 3 and 4mm Cord (choose quantity)
These o-rings will fit the 3mm and 4mm cord snugly.
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
Quick View
Adjustable Ring with Flat Disk – Black Oxide -Pack of 10
Adjustable Ring with Flat Disk- Black Oxide -Pack of 10
Perfect base for your polymer clay creations. Disk size is approx 15mm/5/8"
Works great with the CaBezel Jewelry Molds.
Reviews
There are no reviews yet.