Bail- Pewter tone -tube with Lines-Over sized (Pack of 4)
Product Information
Product code: BFBail-Pewter-Over-sized-Lines Categories: Awesome Deals-Going, Going, Gone!, Bails, JEWELRY SUPPLIES$3.99 Original price was: $3.99.$1.99Current price is: $1.99. H.S.T.
Pewter look Bails-Over sized Pack of 4
These bails are textured with lines cut out. Very elegant looking.
These pewter bails will fit Buna cord up to 12.7 mm in thickness (1/2″) Great for using several thin strands of cord too or use with Sari silk, T-shirt tubes etc. Approximately 3/4″ wide X 5/8″ tall.
Out of stock
Product Categories
Be the first to review “Bail- Pewter tone -tube with Lines-Over sized (Pack of 4)” Cancel reply
You must be logged in to post a review.
Additional information
Weight | 0.012 kg |
---|---|
Dimensions | 2 × 2 × 0.5 cm |
Related Products
Screw Eyes-Silver 15mm (Choose pack of 20 or 50)
Screw Eyes - Silver tone - Package of 20 or 50
These are our larger Screw Eyes. 15mm in length. See images where we compare these to our smaller size.
Jump Rings – Silver 7mm 144 pcs
Jump Rings - Silver tone 7 mm 144 pcs
Measured by weight so count may not always be exact.
Lapel Pin with Clutch (6 sets)
Lapel Pin with Clutch (6 sets) Silver Tone
Yours to embellish however you want. Perfect for attaching to the back of your polymer clay (or other) creation when you want to wear them on clothing.
Use on a lapel, wear it like a brooch or on a sweater to keep it closed at the front when there aren't any buttons.
Easy on and off with the pinch clasp.
Magnetic Closure-Stainless Steel Clasp-ID 6mm (2 clasps)
Magnetic Closure-Stainless Steel Clasp (2 sets) ID 6mm
Beautiful quality, strong magnetic hold. These are over-sized and gorgeous! Less expensive alternative to silver plated clasps.
30.5X10.75 mm Inner dimension is 6 mm
Works with any 6 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
O-Rings for 3 and 4mm Cord (choose quantity)
These o-rings will fit the 3mm and 4mm cord snugly.
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
Brass Bracelet with 1″ Channel
Brass Bracelet with recessed channel
Decorate the recessed area any way you choose.
Insert a strip of textured, silk screened or other clay, beautiful paper or even inks.
Channel is just under 1" wide. Bracelet. 65mm DIA. 1 Piece
ZigZag examples by Judy Betcher. Other examples by Louise Fischer Cozzi
Brooch Back- Silver Tone-Pack of 12
Brooch back- Pin Backs
Pin Back 1.25" Silver Tone Package of 12 pc with locking bar.
Attach with glue, resin or cover with polymer clay and bake for a more secure method.
Black Buna Cording THICK (Choose 6,8 or12.7mm)
Super Thick Buna Cord-Make a Statement! Choose from 6, 8 or 12.7mm thicknesses.
6mm and 8mm cord are sold by the meter so you choose any length you want.
Please note: The thick 12.7mm (1/2" cord) is now sold pre-cut into 60 cm (24") pieces AND now includes 24 thick O-rings to fit the cord.
We also carry several sizes of O-rings to fit the cords. Here Try using our screw eyes to insert onto the ends of the thick cord. More below.
O-Rings for 8mm Buna Cord-50 pack (Choose Thin or Thick)
O-Rings for 8mm Buna Cord-Package of 50.
Choose from the Thin O-Ring or the Thick O-Ring.
These O-Rings fit the 8 mm Buna cord snugly. Use them to finish off the ends of your cord or use them as bead stoppers. Use on thinner buna cord as a decorative element. Use in place of the traditional jump rings. Use as part of your chain maille projects.
Twist Closure-Stainless Steel Clasp-ID 6mm (5 clasps)
Twist Closure-Stainless Steel Clasp (5 sets) ID 6mm
Beautiful quality, strong magnetic hold. Less expensive alternative to silver plated clasps. $2.60 per clasp.
23.3X6.9mm. Inner dimension is 6 mm
Works with any 8 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Reviews
There are no reviews yet.