Be the first to review “Brass Bracelet Cuff 1″ Wide-Flat Surface”
You must be logged in to post a review.
Description
Embellish or use as a form, this brass bracelet cuff is 1″ wide and has a flat surface. The circumference of the oval formed by the bracelet is approximately 7.5″
Additional information
| Weight | 0.055 kg |
|---|---|
| Dimensions | 6.5 × 5 × 3 cm |
Related Products
Quick View
Lapel Pin with Clutch (6 sets)
Lapel Pin with Clutch (6 sets) Silver Tone
Yours to embellish however you want. Perfect for attaching to the back of your polymer clay (or other) creation when you want to wear them on clothing.
Use on a lapel, wear it like a brooch or on a sweater to keep it closed at the front when there aren't any buttons.
Easy on and off with the pinch clasp.
Quick View
O-Rings for 2mm Cord (choose quantity)
O-rings to fit Buna and other Cording
These o-rings will fit the 2mm (up to 3mm cord)
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
We now carry O-rings in both a Thin and Thick version to fit the 8mm and 12.7mm (1/2") Buna cords.
Quick View
Terminator End Caps-Antique Silver (10 Pack) – for 2mm or 4mm cord
Terminator End Cap Antique Silver
This decorative end cap fits either 2 mm or 4 mm cords.
Choose the correct size for your cord (10 Pack)
Exquisite quality. Made in Greece. Glue in place.
Quick View
Brass Bracelet with 1″ Channel
Brass Bracelet with recessed channel
Decorate the recessed area any way you choose.
Insert a strip of textured, silk screened or other clay, beautiful paper or even inks.
Channel is just under 1" wide. Bracelet. 65mm DIA. 1 Piece
ZigZag examples by Judy Betcher. Other examples by Louise Fischer Cozzi
Quick View
Jump Rings – Gold 7mm 144 pcs
Jump Rings - Gold tone 7 mm 144 pcs
Measured by weight so count may not always be exact.
Quick View
End Cap-Stainless Steel to fit 3mm Cord (72 pack)
End Cap to fit 3 mm Cord (72 pack) Stainless Steel (Nickel free)
These end caps are a nice heavy gauge. Glue any 3 mm cord into end cap and then use a jump ring inside the hole to attach clasp of your choice.
Use with our 3 mm Buna cord. for a nice clean finish.
Use with cyanoacrylate glue, epoxy or resin.
Quick View
O-Rings for 12.7mm (1/2″) Buna Cord 50 pack (Choose Thin or Thick)
O-Rings for .500 mm (1/2") Buna Cord-Package of 50.
Choose from the Thin O-Ring or the Thick O-Ring.
These O-Rings fit the 1/2" Buna cord snugly. Use them to finish off the ends of your cord or use them as bead stoppers. Use on thinner buna cord as a decorative element. Use in place of the traditional jump rings. Use as part of your chain maille projects.
Quick View
Jump Rings – Silver 7mm 144 pcs
Jump Rings - Silver tone 7 mm 144 pcs
Measured by weight so count may not always be exact.
Quick View
O-Rings for 8mm Buna Cord-50 pack (Choose Thin or Thick)
O-Rings for 8mm Buna Cord-Package of 50.
Choose from the Thin O-Ring or the Thick O-Ring.
These O-Rings fit the 8 mm Buna cord snugly. Use them to finish off the ends of your cord or use them as bead stoppers. Use on thinner buna cord as a decorative element. Use in place of the traditional jump rings. Use as part of your chain maille projects.
Quick View
Bails- Pewter look- Flat Rectangular Pad-Small
Bails- Rectangular Flat Pad - Pack of 11
These glue-on bails are an easy and convenient way to hang any flat backed pendant or charm.
Length of pad area is 3/8". Perfect for 2mm cording.
Reviews
There are no reviews yet.