Be the first to review “Brooch Back- Silver Tone-Pack of 12”
You must be logged in to post a review.
Additional information
| Weight | 0.019 kg |
|---|---|
| Dimensions | 4 × 3 × 1 cm |
Related Products
Quick View
Barrel-End Cap to fit 6mm Cord (12 pack)
Quick View
Earring Back Stopper
Earring Back Stopper - Plastic 1 gross (144 pcs)
Use these clear stoppers when wearing fish or shepherd type ear wires.
Also great for keeping display earrings on the card. 3.75X4mm
Quick View
Fold Over End Crimp 7mm long Silver Plate Pack of 34 pcs
Fold Over End Crimp 7mm long Silver Plate Pack of 34 pcs
Used to finish off cord ends. Works well on rounded Buna cord and leather 3-5mm thick. Would also be great on flat cord or ribbon.
Quick View
Shepherd Hooks with latch 144 Pairs
Shepherd Hooks with latch 144 Pairs
These shepherd hook earring findings are made with a thin but sturdy wire making them a perfect choice for even delicate earrings.
Built-in latch ensures earring won't slip out of the ear unintentionally. Choose gold or silver tone. Each package contains 144 PAIRS.
Measured by weight so count may not always be exact.
Quick View
Black Buna Cording THICK (Choose 6 or 8mm)
Super Thick Buna Cord-Make a Statement! Choose from 6 or 8mm thicknesses.
6mm and 8mm cord are sold by the meter so you choose any length you want.
We also carry several sizes of O-rings to fit the cords. Here Try using our screw eyes to insert onto the ends of the thick cord. More below.
We no longer stock the 12.7mm thinck Buna cord.
Quick View
Magnetic Closure-Stainless Steel Clasp-ID 6mm (2 clasps)
Magnetic Closure-Stainless Steel Clasp (2 sets) ID 6mm
Beautiful quality, strong magnetic hold. These are over-sized and gorgeous! Less expensive alternative to silver plated clasps.
30.5X10.75 mm Inner dimension is 6 mm
Works with any 6 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Quick View
Adjustable Ring with Flat Disk – Black Oxide -Pack of 10
Adjustable Ring with Flat Disk- Black Oxide -Pack of 10
Perfect base for your polymer clay creations. Disk size is approx 15mm/5/8"
Works great with the CaBezel Jewelry Molds.
Quick View
Terminator End Caps-Antique Silver (10 Pack) – for 2mm or 4mm cord
Terminator End Cap Antique Silver
This decorative end cap fits either 2 mm or 4 mm cords.
Choose the correct size for your cord (10 Pack)
Exquisite quality. Made in Greece. Glue in place.
Quick View
Twist Closure-Stainless Steel Clasp-ID 6mm (5 clasps)
Twist Closure-Stainless Steel Clasp (5 sets) ID 6mm
Beautiful quality, strong magnetic hold. Less expensive alternative to silver plated clasps. $2.60 per clasp.
23.3X6.9mm. Inner dimension is 6 mm
Works with any 8 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Quick View
O-Rings for 2mm Cord (choose quantity)
O-rings to fit Buna and other Cording
These o-rings will fit the 2mm (up to 3mm cord)
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
We now carry O-rings in both a Thin and Thick version to fit the 8mm and 12.7mm (1/2") Buna cords.
Reviews
There are no reviews yet.