1 review for Brass Bracelet with 1″ Channel
Add a review
You must be logged in to post a review.
Description
ZigZag examples by Judy Betcher. Other examples by Louise Fischer Cozzi
Additional information
| Weight | 0.049 kg |
|---|---|
| Dimensions | 7 × 7 × 3 cm |
Related Products
Quick View
Terminator End Caps-Antique Silver (10 Pack) – for 2mm or 4mm cord
Terminator End Cap Antique Silver
This decorative end cap fits either 2 mm or 4 mm cords.
Choose the correct size for your cord (10 Pack)
Exquisite quality. Made in Greece. Glue in place.
Quick View
O-Rings for 2mm Cord (choose quantity)
O-rings to fit Buna and other Cording
These o-rings will fit the 2mm (up to 3mm cord)
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
We now carry O-rings in both a Thin and Thick version to fit the 8mm and 12.7mm (1/2") Buna cords.
Quick View
End Caps-Foldover-Oval Antique Brass 11mm -(12 pack)
Folder over End Caps-Antique Brass- 12 per package
These 11mm Antique Brass End Caps are oval so they will accommodate some licorice type leathers.
OR gently bend them with pliers to accommodate round cords including Buna cord. Squeeze firmly or glue in place.
Quick View
End Caps-Foldover-Oval Silver Plate 11mm -(12 pack)
Folder over End Caps-Silver Plate- 12 per package
These 11mm Silver Plated end caps are oval so they will accommodate some licorice type leathers.
OR gently bend them with pliers to accommodate round cords including Buna cord. Squeeze firmly or glue in place.
Quick View
Black Buna Cording (choose thickness 2mm-4mm) sold by the meter
Buna Cord comes in black with a variety of thicknesses to choose from
Our black Buna cord is industrial grade. Great for using with any jewelry project.
Sold by the meter but you decide how long the cut piece is (only the 12.7 thickest size is pre-cut and comes with o-rings.)
See below for more information. If you like to make a statement with your jewelry, go here for the thicker options.
Quick View
End Cap-Stainless Steel to fit 3mm Cord (72 pack)
End Cap to fit 3 mm Cord (72 pack) Stainless Steel (Nickel free)
These end caps are a nice heavy gauge. Glue any 3 mm cord into end cap and then use a jump ring inside the hole to attach clasp of your choice.
Use with our 3 mm Buna cord. for a nice clean finish.
Use with cyanoacrylate glue, epoxy or resin.
Quick View
Brooch Back- Silver Tone-Pack of 12
Brooch back- Pin Backs
Pin Back 1.25" Silver Tone Package of 12 pc with locking bar.
Attach with glue, resin or cover with polymer clay and bake for a more secure method.
Quick View
Magnetic Closure-Stainless Steel Clasp-ID 6mm (2 clasps)
Magnetic Closure-Stainless Steel Clasp (2 sets) ID 6mm
Beautiful quality, strong magnetic hold. These are over-sized and gorgeous! Less expensive alternative to silver plated clasps.
30.5X10.75 mm Inner dimension is 6 mm
Works with any 6 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Quick View
Jump Rings – Silver 7mm 144 pcs
Jump Rings - Silver tone 7 mm 144 pcs
Measured by weight so count may not always be exact.
Susan Christopher (verified owner) –
These bracelets are of good quality. I use them as a mold for my polymer clay bracelets but they can also be used as is with beautiful paper.