End Cap-Stainless Steel to fit 3mm Cord (72 pack)
Product Information
$10.50 Original price was: $10.50.$7.50Current price is: $7.50. H.S.T.
End Cap to fit 3 mm Cord (72 pack) Stainless Steel (Nickel free)
These end caps are a nice heavy gauge. Glue any 3 mm cord into end cap and then use a jump ring inside the hole to attach clasp of your choice.
Use with our 3 mm Buna cord. for a nice clean finish.
Use with cyanoacrylate glue, epoxy or resin.
1 in stock
Product brand
BeadSmith
Product Categories
1 review for End Cap-Stainless Steel to fit 3mm Cord (72 pack)
Add a review Cancel reply
You must be logged in to post a review.
Additional information
Weight | 0.036 kg |
---|---|
Dimensions | 3 × 3 × 1 cm |
Our offers
Black Buna Cording (choose thickness 2mm-4mm) sold by the meter
Buna Cord comes in black with a variety of thicknesses to choose from
Our black Buna cord is industrial grade. Great for using with any jewelry project.
Sold by the meter but you decide how long the cut piece is (only the 12.7 thickest size is pre-cut and comes with o-rings.)
See below for more information. If you like to make a statement with your jewelry, go here for the thicker options.
O-Rings for 3 and 4mm Cord (choose quantity)
These o-rings will fit the 3mm and 4mm cord snugly.
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
Related Products
Barrel-End Cap to fit 6mm Cord (12 pack)
Jump Rings – Silver 7mm 144 pcs
Jump Rings - Silver tone 7 mm 144 pcs
Measured by weight so count may not always be exact.
Magnetic Closure-Stainless Steel Clasp-ID 4mm/5 sets
Magnetic Closure-Stainless Steel Clasp 5 sets
Beautiful quality, strong magnetic hold. Less expensive alternative to silver plated clasps.
17X7.9M Inner dimension is 4 mm
Works with any 4 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
O-rings for 5 and 6 mm Cord (choose quantity)
O-rings for both our 5mm and 6mm Buna Cords-Package of 50
We carry several sizes of O-rings.
They can used decoratively or functionally. Use to help finish off the end cap. Use them as spacers or stoppers. Use them as rings for chain maille projects or in place of traditional jump rings.
Fold Over End Crimp 7mm long Silver Plate Pack of 36 pcs
Fold Over End Crimp 7mm long Silver Plate Pack of 36 pcs
Used to finish off cord ends. Works well on rounded Buna cord and leather 3-5mm thick. Would also be great on flat cord or ribbon.
End Caps-Foldover-Oval Antique Brass 11mm -(12 pack)
Folder over End Caps-Antique Brass- 12 per package
These 11mm Antique Brass End Caps are oval so they will accommodate some licorice type leathers.
OR gently bend them with pliers to accommodate round cords including Buna cord. Squeeze firmly or glue in place.
Jump Rings – Silver 5mm 144 pcs
Jump Rings - Silver 5 mm 144 pcs
Measured by weight so count may not always be exact.
O-Rings for 2mm Cord (choose quantity)
O-rings to fit Buna and other Cording
These o-rings will fit the 2mm (up to 3mm cord)
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
We now carry O-rings in both a Thin and Thick version to fit the 8mm and 12.7mm (1/2") Buna cords.
kathy100 (verified owner) –
Very well made and fit great on the Buna Cord. I use a drop Super glue to keep them attached to the cord.