Terminator End Caps-Antique Silver (10 Pack) – for 2mm or 4mm cord
Product Information
Categories: End Caps, Findings, JEWELRY SUPPLIES$6.99 – $8.99 H.S.T.
Terminator End Cap Antique Silver
This decorative end cap fits either 2 mm or 4 mm cords.
Choose the correct size for your cord (10 Pack)
Exquisite quality. Made in Greece. Glue in place.
Product brand
BeadSmith
Product Categories
Be the first to review “Terminator End Caps-Antique Silver (10 Pack) – for 2mm or 4mm cord” Cancel reply
You must be logged in to post a review.
Our offers
Black Buna Cording (choose thickness 2mm-4mm) sold by the meter
Buna Cord comes in black with a variety of thicknesses to choose from
Our black Buna cord is industrial grade. Great for using with any jewelry project.
Sold by the meter but you decide how long the cut piece is (only the 12.7 thickest size is pre-cut and comes with o-rings.)
See below for more information. If you like to make a statement with your jewelry, go here for the thicker options.
Related Products
Brass Bracelet with 1″ Channel
Brass Bracelet with recessed channel
Decorate the recessed area any way you choose.
Insert a strip of textured, silk screened or other clay, beautiful paper or even inks.
Channel is just under 1" wide. Bracelet. 65mm DIA. 1 Piece
ZigZag examples by Judy Betcher. Other examples by Louise Fischer Cozzi
Screw Eyes-Silver 15mm (Choose pack of 20 or 50)
Screw Eyes - Silver tone - Package of 20 or 50
These are our larger Screw Eyes. 15mm in length. See images where we compare these to our smaller size.
O-rings for 5 and 6 mm Cord (choose quantity)
O-rings for both our 5mm and 6mm Buna Cords-Package of 50
We carry several sizes of O-rings.
They can used decoratively or functionally. Use to help finish off the end cap. Use them as spacers or stoppers. Use them as rings for chain maille projects or in place of traditional jump rings.
Magnetic Closure-Stainless Steel Clasp-ID 6mm (2 clasps)
Magnetic Closure-Stainless Steel Clasp (2 sets) ID 6mm
Beautiful quality, strong magnetic hold. These are over-sized and gorgeous! Less expensive alternative to silver plated clasps.
30.5X10.75 mm Inner dimension is 6 mm
Works with any 6 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
O-Rings for 3 and 4mm Cord (choose quantity)
These o-rings will fit the 3mm and 4mm cord snugly.
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
Twist Closure-Stainless Steel Clasp-ID 6mm (5 clasps)
Twist Closure-Stainless Steel Clasp (5 sets) ID 6mm
Beautiful quality, strong magnetic hold. Less expensive alternative to silver plated clasps. $2.60 per clasp.
23.3X6.9mm. Inner dimension is 6 mm
Works with any 8 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Lapel Pin with Clutch (6 sets)
Lapel Pin with Clutch (6 sets) Silver Tone
Yours to embellish however you want. Perfect for attaching to the back of your polymer clay (or other) creation when you want to wear them on clothing.
Use on a lapel, wear it like a brooch or on a sweater to keep it closed at the front when there aren't any buttons.
Easy on and off with the pinch clasp.
Black Buna Cording THICK (Choose 6,8 or12.7mm)
Super Thick Buna Cord-Make a Statement! Choose from 6, 8 or 12.7mm thicknesses.
6mm and 8mm cord are sold by the meter so you choose any length you want.
Please note: The thick 12.7mm (1/2" cord) is now sold pre-cut into 60 cm (24") pieces AND now includes 24 thick O-rings to fit the cord.
We also carry several sizes of O-rings to fit the cords. Here Try using our screw eyes to insert onto the ends of the thick cord. More below.
O-Rings for 8mm Buna Cord-50 pack (Choose Thin or Thick)
O-Rings for 8mm Buna Cord-Package of 50.
Choose from the Thin O-Ring or the Thick O-Ring.
These O-Rings fit the 8 mm Buna cord snugly. Use them to finish off the ends of your cord or use them as bead stoppers. Use on thinner buna cord as a decorative element. Use in place of the traditional jump rings. Use as part of your chain maille projects.
Reviews
There are no reviews yet.