O-Rings for 3 and 4mm Cord (choose quantity)
Product Information
$5.99 – $8.99 H.S.T.
These o-rings will fit the 3mm and 4mm cord snugly.
O-rings can be used decoratively or functionally. As stoppers, dividers and as jump rings. Use them to create loops at the end of your buna cord. They will finish off the sides of polymer clay pendants nicely that have been drilled to accept cord.
We carry several sizes of O-rings here.
Various end caps are here.
Product brand
Buna
Product Categories
1 review for O-Rings for 3 and 4mm Cord (choose quantity)
Add a review Cancel reply
You must be logged in to post a review.
Description
Our offers
Black Buna Cording THICK (Choose 6,8 or12.7mm)
Super Thick Buna Cord-Make a Statement! Choose from 6, 8 or 12.7mm thicknesses.
6mm and 8mm cord are sold by the meter so you choose any length you want.
Please note: The thick 12.7mm (1/2" cord) is now sold pre-cut into 60 cm (24") pieces AND now includes 24 thick O-rings to fit the cord.
We also carry several sizes of O-rings to fit the cords. Here Try using our screw eyes to insert onto the ends of the thick cord. More below.
Related Products
Lapel Pin with Clutch (6 sets)
Lapel Pin with Clutch (6 sets) Silver Tone
Yours to embellish however you want. Perfect for attaching to the back of your polymer clay (or other) creation when you want to wear them on clothing.
Use on a lapel, wear it like a brooch or on a sweater to keep it closed at the front when there aren't any buttons.
Easy on and off with the pinch clasp.
Magnetic Closure-Stainless Steel Clasp-ID 8mm (5 clasps)
Magnetic Closure-Stainless Steel Clasp (5 sets) ID 8mm
Beautiful quality, strong magnetic hold.
19X9mm Inner dimension is 8 mm
Works with any 8 mm cord including our Buna cord. Glue in place using a super glue like Loctite or resin or a 2 part epoxy found here.
Terminator End Caps-Antique Silver (10 Pack) – for 2mm or 4mm cord
Terminator End Cap Antique Silver
This decorative end cap fits either 2 mm or 4 mm cords.
Choose the correct size for your cord (10 Pack)
Exquisite quality. Made in Greece. Glue in place.
End Cap-Stainless Steel to fit 3mm Cord (72 pack)
End Cap to fit 3 mm Cord (72 pack) Stainless Steel (Nickel free)
These end caps are a nice heavy gauge. Glue any 3 mm cord into end cap and then use a jump ring inside the hole to attach clasp of your choice.
Use with our 3 mm Buna cord. for a nice clean finish.
Use with cyanoacrylate glue, epoxy or resin.
Jump Rings – Silver 7mm 144 pcs
Jump Rings - Silver tone 7 mm 144 pcs
Measured by weight so count may not always be exact.
Earring Base 6mm (144 pcs) Stainless Steel
6 mm Flat Post - Stainless Steel Studs , Round Earring Base-Pack of 144- (Stabilizer Clutches sold separately)
These surgical steel bases can be glued onto your baked polymer clay earrings. They can be embedded for added strength and durability. Or, attach object to base with strong glue or epoxy.
Black Buna Cording (choose thickness 2mm-5mm) sold by the meter
Buna Cord comes in black and in a variety of thicknesses to choose from
Our black Buna cord is industrial grade. Great for using with any jewelry project.
Sold by the meter but you decide how long the cut piece is (only the 12.7 thickest size is pre-cut and comes with o-rings.)
See below for more information.
O-Rings for 8mm Buna Cord-50 pack (Choose Thin or Thick)
O-Rings for 8mm Buna Cord-Package of 50.
Choose from the Thin O-Ring or the Thick O-Ring.
These O-Rings fit the 8 mm Buna cord snugly. Use them to finish off the ends of your cord or use them as bead stoppers. Use on thinner buna cord as a decorative element. Use in place of the traditional jump rings. Use as part of your chain maille projects.
Adjustable Ring with Flat Disk – Black Oxide -Pack of 10
Adjustable Ring with Flat Disk- Black Oxide -Pack of 10
Perfect base for your polymer clay creations. Disk size is approx 15mm/5/8"
Works great with the CaBezel Jewelry Molds.
kathy100 (verified owner) –
These o rings are perfect with the Buna cord to keep your pendants from moving.